128×64 Dot Matrix LCD Screen

Basic parameters

128×64 dot matrix LCD, 128×64 graphics screen, BL13479 LCD module (LCM), 12864-653-PFDSW-R-A2, 128x 64 pixels, uses FSTN mode, ST7567A chip display data RAM, capacity: 128×64 = 8192 bits, supports serial interface.

Internally equipped with low power consumption LCD Power supply circuit. Boost circuit (boost ratio is 4X / 5X, can input boost reference power supply from external). High precision voltage regulation circuit (thermal gradient-0.05%/°C) Internal equipment V0 Voltage stabilizing resistor, internally equipped LCD Voltage divider resistor.

ITEM	DESCRIPTION	UNIT
Outline Size	27.2(L)×21.45(W)×3.1(T)	mm
LCD Type	FSTN/Transflective/Positive,1/64Duty,1/9Bias
Display type	128×64 dots
view area	23.5 × 14.0	mm
Display area	21.74 × 11.50	mm
Dots size	0.15 × 0.0.16	mm
Dots pitch	0.17 × 0.18	mm
Controller & driver	ST7567-COG
View direction	6 O'Clock
Interface mode	4-Line Interface
VDD&VOP(Type)	3.3 V & 9.0 V	V
Backlight(Type)	White, 3.0V, 15mA
Operation Temp.	-30 ~ + 70	℃
Storage Temp.	-30 ~ + 80	℃

Plan

Interface

NO.	FUNCTION DESCRIPTIONS	SYMBOL
1	NC	NC
2	Chip Select input pin. Active “L”	CS1B
3	Hardware reset input pin. Active “L”	RST
4	Data or Command select. DATA is “H” , COMMAND is “L”	A0
5	While connected to 8080 series MPU, this pin is treated as the” /WR”	/WR(R/W)
	signal of the 8080 MPU and is LOW-active.
	While connected to 6800 series MPU, this pin is treated as the “RW”
	signal of the 6800 MPU and decides the access
	type:WHEN RW=”H”: Read.WHEN RW=”L”: Write.

6	While connected to 8080 series MPU,	/RD(E)
	this pin is treated as the “/RD” signal of the 8080 MPU and is LOW-active.
	While connected to 6800 series MPU, this pin is treated as the “E”
	signal of the 6800 MPU and is HIGH-active.
7	8 bit data bus.	D0
8	When using serial interface: 4-line SPI, 3-line SPI or I2C serial”,interface, D[0]=SCL:Serial clock input., D[1]=SDA_IN:Serial data input., D[2:3]=SDA_OUT: Serial data output., D[1:3] must be connected together as SDA., "D[4:7]=(1,1,1,1):ID Pin.D[4:7] should fix to ""H""or""L""by VDDH or VSSL.",	D1
9		D2
10		D3
11		D4
12		D5
13		D6
14		D7
15	POWER	VDD
16	GROUND	VSS
17	NC	NC
18	NC	NC
19	LCD driving voltage	V0
20	LCD driving voltage	XVO
21	NC	NC
22	NC	NC
23	LCD driving voltage	VG
24	NC	NC
25	NC	NC
26	NC	NC
27	NC	NC
28 - 29	PSB C86 Selected interface
30	NC	NC

PSB	C86	Selected Interface
"L"	"L"	Serial 3-Line SPI Interface
"L"	"H"	Serial 4-Line SPI Interface
"H	"L"	Parallel 8080 Series MPU Interface
"H	"H"	Parallel 6800 Series MPU Interface

Image

FAQ

I. Minimum Order Quantity for Small-Size TFT (Semi-Custom)

Our MOQ is quite flexible. Small-sized semi-custom TFT displays are generally ordered from 100 pieces, and lower quantities can be negotiated for trial production or sampling projects.

III. Under what circumstances is FAE technical support supported?

Mass production or large-volume projectsWhen orders reach a certain scale
Project development phase：The customer is adapting the screen driver, interface voltage or software
special needs：If you need horizontal screen display, touch solution, etc.

V. How do you ensure smooth communication?

Our sales team is familiar with international trade and the technical specifications of TFT displays. We respond quickly (usually within 2 hours) and confirm every detail using complete technical drawings or physical photos and samples before production.

7. Your factory can directly handle shipping and export documents.

We can arrange shipping terms such as EXW, FOB, and CIF, and work with your designated freight forwarder.

Whether it's air freight, sea freight, or express delivery, we can ensure fast and safe delivery.

II. Minimum Order Quantity for Medium-Sized TFTs (Semi-Customized)

Our MOQ is quite flexible. Medium-sized semi-custom TFT displays are generally ordered from 50 pieces, and lower quantities can be negotiated for trial production or sampling projects.

IV. What projects can be customized?

Touch Screen: Capacitive and resistive touch screen, AG, AF, AR, etc.
Backlight brightnessIt can meet requirements of over 1000 cd/m². (Minolta color analysis instrument)
Industrial and medical：Need to meet specific industry requirements, etc.

VI. Why choose you?

Many overseas customers prefer to use agents due to considerations such as communication, quality, and international logistics.

Our team has extensive experience and provides a one-stop service—from design, quotation, production, quality inspection, after-sales service, customs clearance to international shipping. You will get factory-direct prices and the convenience of service.

8. Which countries are our main clients?

China, Asia, Europe

LCD Catalog

① Customized display screen

A. External structure, backlight, and interface FPC.
B. Brightness 1000cd/m², interface type, FPCA can be modified.
C. Customers require customized interface conversion between RGB, SPI, MCU, LVDS, and MIPI.

② High brightness

High-brightness backlight technology (≥1000nits), still clearly visible under sunlight.

③ Perspective

A. The viewing angles from top to bottom, left to right are all 60 degrees.
B. IPS full viewing angle, with a viewing angle of 89 degrees on the top, bottom, left, and right.

④ Touch screen

A. Capacitive touchscreen, AR (anti-reflective), AG (anti-glare), AF (anti-fingerprint), TDM display touchscreen OCA optical integration bonding.

B. Four- or five-wire resistive touchscreen, glossy/matte finish customizable.

128×64 graphics screen

Basic parameters

Plan

Interface

Image

FAQ

LCD Catalog

Recommended TFT LCD screens